Ghost 2 Immobiliser Installation
The ghost 2 immobiliser installation is a quick and efficient way to secure your vehicle from theft. It is directly connected to the CAN network of your vehicle and is hardly noticeable.
First, determine the source of power that is constant and the grounding point. These wires must be insulated to avoid electrical shorts.
Prevents theft
The Ghost 2 Immobiliser utilizes an exclusive PIN code sequence that is created using the electronic buttons on your steering wheel or center console to ensure that only you are able to start your car. Even if thieves are able to copy your keys or hack the system of your car it will not be able to start the vehicle. It's also completely undetectable to anyone who tries to use it, so you can be sure that no one will ever know that you have added an additional layer of security.
It is also effective in preventing theft because it can stop the engine of your car even if a thief is able to get inside. This is accomplished through a secondary device, called the Shadow. It is connected to your vehicle's CAN network and doesn't communicate using radio frequency. This makes it difficult for thieves and others to locate. Additionally, the Shadow is able to be connected to a tracking/paging system to allow you to keep track of your vehicle's movements. Additionally, it also has an output which can be used to activate the siren (if authorised) when someone is attempting to steal the vehicle.
It is vital to work in a well-lit area when working with wiring to aid in identifying the correct wires, and to avoid short circuits or accidental disconnections. It is also essential to double-check and test the connections, as well as to insulate the wiring to protect it from the elements. Cable tie is a great way to bundle and secure wires. This will improve their appearance and decrease the chance of them getting dislodged when the vehicle is in operation.
It is also a good idea to mark the CAN H and L wires using pieces of tape or labels, as misidentifying their location could result in a power surge which damages the immobiliser. Multimeters can be used to check that the power source and grounding points are providing an uninterrupted 12V and a solid connection.
Simple to use
A ghost immobiliser is an excellent way to protect your vehicle from theft. It protects against key cloning ECU swapping and other security threats, and can be used with an iPhone app for easy management and monitoring. The app also sends alerts if your car is altered. It can also help you locate your car if it is stolen.
The Ghost immobiliser can be operated without the need for special equipment. It is connected to the CAN system in your vehicle, and is programmed using a unique PIN. You can activate it by using a series buttons on your dashboard, steering wheel or the WeCar app. The code must be entered to turn on the engine, so thieves aren't able to turn off your vehicle and drive off.
Installing a ghost ignition system is a straightforward process, but it is important to follow the steps carefully to ensure that it is a seamless integration with your vehicle's current systems. The first step is to remove the battery. This will prevent accidental airbag deployment and ensure safety. It's also important to work in a well-lit location to ensure that connections are precise and avoid making mistakes. It is also essential to employ proper soldering techniques or high-quality connectors to ensure a solid and reliable connection.
The CAN H wire and the CAN L wire are required to connect your Ghost immobiliser with the wiring in your vehicle. With a wiring diagram for your vehicle determine these wires and locate a suitable spot to connect them. It is also helpful to mark the wires with labels or tape so that you can easily identify them during the installation process.
Once the connections are established, it's a good idea to test the immobiliser to make sure that it is working correctly. You should also test the Transport Mode which disables the Ghost System and allows you to temporarily turn off your security functions. This is especially helpful in scenarios such as transportation of vehicles or service. This feature is particularly beneficial when your vehicle is older and requires the battery to be isolated during service.
Low-profile
Ghost immobilisers are an ideal solution to prevent theft in keyless entry vehicles and vans. It works by capturing your vehicle's remote control signal and constructing a barrier that thieves are unable to break it without the correct PIN code. TheKeyLab 's a discreet and reliable method of protecting your vehicle and is suggested by insurance companies to reduce monthly cost. It is a low-profile, concealed system that can be located in your car's buttons. It does not have LED indicators, making it virtually undetectable by thieves.
In contrast to other security systems that are available, the Ghost immobiliser is connected to your vehicle's CAN data network instead of the key fob. This means that thieves won't be able to detect or disable the device through wire cutting and it's tamper-proof. This makes it more difficult to steal your vehicle and it's also an excellent option for older vehicles that aren't equipped with a modern keyless entry system.
The installation of a ghost immobiliser may be done by professionals, or you can do it yourself using the right tools and materials. You'll need a few basic hand tools and a multimeter to test the electrical value, and insulation tape or cable ties to ensure that your connections are secure and well-insulated. It is also recommended to disconnect your battery prior to starting it, and ensure that all wiring is properly wrapped and insulated to avoid the theft of your wiring.
You can ask an authorised shop to install your immobiliser if you are not comfortable doing it yourself. They'll take care of everything from the initial inspection all the way to installing the device and will offer a guarantee in the event that something goes wrong. They'll be in a position to answer any questions you have about the immobiliser and assist you in deciding whether or not it is the right choice for your car.
The Autowatch Ghost 2 is a smart immobiliser that integrates directly with your car's ECU. This protects against hacking, key cloning, and relay attacks that are common among modern vehicles. It is TASSA-verified and offers superior theft protection, so you can drive safely.
TASSA verified
The Ghost immobiliser is among the best ways to safeguard your car from theft. It connects to the CAN data network of your car and uses it to prevent the engine from starting without your personal PIN code. The system isn't able to be detected by thieves and is an excellent alternative to car alarms. You can change the PIN code at any time and only you'll know it, which will ensure the security of your vehicle.
Installers TASSA certified can install the Ghost system at your office or in your home within a few short hours. You will also receive an emergency card, installation certificate as well as owner's guides. They will also provide you with a a thorough demonstration of the device and make sure that you are satisfied with the service before they leave.
The Ghost, unlike other immobilisers is able connect directly to the CAN data network of your vehicle. It can be installed without needing to cut any wires. It is also silent and is therefore difficult to detect by thieves. The system has a unique and reversible PIN code, which you enter by pressing buttons on the dashboard or the steering wheel. This stops anyone from starting your car even if they have your key fobs.
When you're ready for installing an immobiliser ghost 2, you should begin by disconnecting the battery. This will avoid any airbag deployments that happen accidentally or short circuits during the process. Once the battery has been disconnected you must follow the steps in the user manual to connect the immobiliser. It is also recommended to consult online resources for more information specific to the model of your vehicle.
Upon completion, you should check the immobiliser to ensure that it works properly. You can do this by entering the PIN code and trying to start the vehicle. Then, you should conduct regular checks on the immobiliser in order to ensure it's working correctly. This will help you spot any issues early so you can resolve them quickly.